|
Tenor Sax
The tenor saxophone is a medium-sized member of the saxophone family, a group of instruments invented by Adolphe Sax in the 1840s. The tenor, with the alto, are the two most common types of saxophones. The tenor is pitched in the key of B♭, and written as a transposing instrument in the treble clef, sounding a major ninth lower than the written pitch. It sounds deeper than the alto sax. The tenor saxophone uses a slightly larger mouthpiece, reed, and ligature than the alto saxophone, and is easily distinguished from that instrument by the crook or bend in its neck just ahead of the mouthpiece.
The tenor saxophone is used in many different types of ensembles, including concert bands, big band jazz ensembles, small jazz ensembles, and marching bands. It is occasionally included in pieces written for symphony orchestra and for chamber ensembles; three examples of this are Ravel's Boléro, Prokofiev's suite from Lieutenant Kijé,and Webern's Quartet for violin, clarinet, tenor saxophone, and piano. In concert bands, the tenor plays mostly a supporting role, sometimes sharing parts with the euphonium, horn and trombone. In jazz ensembles, the tenor plays a more prominent role, often sharing parts or harmonies with the alto saxophone. History The tenor saxophone was one of a family of fourteen instruments patented in 1846 by Adolphe Sax, a Belgian-born instrument maker, flautist and clarinetist. A medley of ideas drawn from the clarinet, flute, oboe and ophicleide, the saxophone was intended to form a tonal link between the clarinets and brass instruments found in military bands, an area which Sax considered sorely lacking. Sax's patent, granted on 28 June 1846, divided the family into two groups of seven instruments, each ranging from sopranino down to contrabass. One family, pitched alternatively in B♭ and E♭, was designed specifically to integrate with the other instruments then common in military bands. The tenor saxophone, pitched in B♭, is the fourth member of this family. Description The tenor saxophone, like all saxes, is in essence an approximately conical tube of thin metal, usually brass. The wider end of the tube is flared slightly to form a bell, while the narrower end is connected to a mouthpiece similar to that of a clarinet. At intervals down the bore are placed between 20 and 23 tone holes; these are covered by pads which can be pressed onto the holes to form an airtight seal. There are also two small speaker holes which, when opened, disrupt the lower harmonics of the instrument and cause it to overblow into an upper register. The pads are controlled by pressing a number of keys with the fingers of the left and right hands; the left thumb controls an octave key which opens one or other of the speaker holes. The original design of tenor saxophone had a separate octave key for each speaker hole, in the manner of the bassoon; the mechanism by which the correct speaker hole is selected based on the fingering of the left hand (specifically the left ring finger) was developed soon after Sax's patent expired in 1866. Although a handful of novelty tenors have been constructed 'straight', like the smaller members of the saxophone family, the unwieldy length of the straight configuration means that almost all tenor saxophones feature a 'U-bend' above the third-lowest tone hole which is characteristic of the saxophone family. The tenor saxophone is also curved at the top, above the highest tone-hole but below the highest speaker hole. While the alto is usually bent only through 80–90° to make the mouthpiece fit more easily in the mouth, the tenor is usually bent a little more in this section, incorporating a slight S-bend. The mouthpiece of the tenor saxophone is very similar to that of the clarinet, an approximately wedge-shaped tube, open along one face and covered in use by a thin strip of material prepared from the stem of the giant cane (arundo donax) commonly known as a reed. The reed is shaved to come to an extremely thin point, and is clamped over the mouthpiece by the use of a ligature. When air is blown through the mouthpiece, the reed vibrates and generates the acoustic resonances required to produce a sound from the instrument. The mouthpiece is the area of the saxophone with the greatest flexibility in shape and style, so the timbre of the instrument is primarily determined by the material and dimensions of its mouthpiece. Materials used in mouthpiece construction include plastic, ebonite and various metals e.g. bronze, brass and stainless steel. The mouthpiece of the tenor saxophone is proportionally larger than that of the alto, necessitating a similarly larger reed. The increased stiffness of the reed and the greater airflow required to establish resonance in the larger body means the tenor sax requires greater lung power but a looser embouchure than the higher-pitched members of the saxophone family. The tenor sax reed is similar in size to that used in the bass clarinet, so the two can be easily substituted. This article is copied from Wikipedia Encyclopedia's great article on Tenor Saxophone. Click here to go there with links on almost every key word. Chasons products you may consider.
 * BiNaK 495 Musical Instrument Oil
Pour -Point Depressant for cold weather use. Does not contain silicones. Has "metal protectors" for the delicate brass and silver interiors. Protects against the harmful effects of moisture. Is classified as holistic...Contains no carcinogens or mutagens. Has a Material Safety Data Sheet on file. Low evaporation rate. Lubrication lasts far longer then previous oils. Can be used on all parts of an instrument. Valves, Slides, Rotors and keys.* BiNaK PRO Musical Instrument Oil * Revolutionary new oils for all your musical instrument lubrication needs! Note: The BiNaK 495 and the BiNaK PRO have all the same, wonderful capabilities with one another. The only difference is that the BiNaK PRO is a lighter oil in viscosity. BiNaK 495 and BiNaK PRO are "Revolutionary" NEW musical instrument oils with a superior lubrication capability over previous valve, slide, key and rotor oils. Test sites have stated that they had to lubricate their instruments less often. The BiNaK 495 and the BiNaK PRO can be used in all areas of musical instrument lubrication; thereby eliminating the need for additional costly products. BiNaK Tuning Slide Lubricant is compatible with the BiNaK oils and has just the right consistency for tuning slides, without the fear of too much lubrication. This grease is a petroleum product and does not dry out over long periods of time. Only a thin film is needed for superior performance! Gig Dust   Chromatic Tuner I hiked all through the 2010 Winter NAMM convention to find the smallest clip-on chromatic tuner with the biggest and best functioning screen. I found it! Chasons CT-20 is light enough to leave clipped on your horn through your whole practice regimen. Our tuner adjusts to any angle. • Ultra large LCD screen • Mic or vibration input • Adjustable calibration range (A-410-490Hz) • Auto power off and memory backup, battery included • Detection range: A0(27.5 Hz) - C8(4186.0 Hz) |
